Bando Timing Belt HTD-8M-1600-50

HTD-8M-1600-50 · Bando

Bando Timing Belt HTD-8M-1600-50 (HTD-8M-1600-50). Sabuk transmisi profil HTD 8M. Sabuk sinkron (timing) — rasio tetap tanpa slip, posisi angular terjaga. End-use: Higher torque synchronous drives; ganti jika tooth shear, fabric peel, atau back crack. Ketahanan: Jangan over-tension; ikut toleransi pulley HTD; kontaminasi oli mempercepat failure pada grade standar.

Spesifikasi Teknis

Section	HTD 8M
Length	Pitch length class HTD-8M-1600-50
Top width	50 mm
Height	tooth HTD 8 mm
Material	CR or HNBR body (premium oil/heat resistant grades available)
Cord	Glass fiber or steel cord (depending on series)
Temp range	-20°C to +100°C (HNBR higher)

Ringkasan: Profil HTD 8M; Pitch length class HTD-8M-1600-50; lebar nominal ~50 mm; tinggi ~tooth HTD 8 mm; sudut flank ~curvilinear HTD. Pitch 8 mm, lebar 50 mm. Gigi curvilinear HTD untuk kapasitas lebih tinggi vs trapezoidal lama. Bahan: CR or HNBR body (premium oil/heat resistant grades available); cord: Glass fiber or steel cord (depending on series).

Kode Pengganti / Cross-Reference

Kode alternatif dari sumber: Gates HTD-8M-1600-50, Optibelt HTD-8M-1600-50, Bando HTD-8M-1600-50, ContiTech HTD-8M-1600-50

Sparepart Terkait — V-Belt

• V-Belt Industri Profil A-26 A-26
• V-Belt Industri Profil A-31 A-31
• V-Belt Industri Profil A-35 A-35
• V-Belt Industri Profil A-38 A-38